Glass labware
Glass Funnel, a conical shape, 36mm - outer diameter, 45mm - stem, the end of the stem is oblique at an angle of 45° The main purpose of the glass funnel is a careful transfusion of liquids or the pouring of granular substances from one vessel to another. Glass funnels are also used for cleaning liquids from mechanical impurities by filtration. In order to do so, you should insert a filter paper or a filter of another material into the funnel.
Glass filter funnel with coarse filter, 50 ml, coarse filter: filtration Pore Diameter is 40-100 Micron Funnel has a sealed-in glass fritted disc of the listed porosity. This item is normally used for vacuum operations. It is suitable whenever filter papers or membranes fail to withstand the reactions caused by aggressive chemicals.
50 ml graduated cylinder with round glass base and spout mouth. Capacity - 50 ml, Sub. Div. - 1.0 ml, Tolerance - 0.25 ml Height 7.5" x 2.2" wide base, outer diameter 0.9" The cylinder is made of chemical glass, a special glass which combines high chemical resistance and strength, as well as high transparency, and the possibility of sterilization. The chemical glass labware is commonly used for analytical work, storage of chemicals and reagents, for preparation and conduct of chemical and biological analyzes, organic and inorganic synthesis.
Volumetric flask 50 ml with glass stopper Volumetric flask is made of a durable transparent glass, with high neck and one ring mark. The vessel has a flat bottom, which makes it convenient to work with and does not require the use of tripods or any other support. The flask is sealed with the glass stopper that comes with the kit. Such glass labware is universal. It can be used for analytical work, as well as for mixing chemicals.
Y-Connector tube, 10mm hose, 1.77"(45mm) arm length Y-Connector tube is a straight tube made out of the chemical glass, diverging into two identical tubes with the same diameter, forming an angle of 65° between them. Y-Connector tube is a part of the laboratory equipment intended for assembling the devices. Hose barbs on each end of the tube ensure a snug fit.